Opens in a new tab

Flow Master Reference Power Cord

Triple-scaled architecture

The Flow Master Reference power cord employs three times the conductor mass of standard Flow, while triple cryogenic and polishing processes combine with machined separator spacers to deliver what customers consistently describe as “more” of everything—dynamics, resolution, and the signature Argento tonal balance.

Available connectors:
IEC 13 (15 Amp), IEC 19 (20 Amp), AC (USA), Schucko (Europe)
Available colors:
Black, White
Available colors:
IEC 13 (15 Amp), IEC 19 (20 Amp), AC (USA), Schucko (Europe)
Available connectors:
Black, White
Available lengths:

Construction

  • Triple cryogenic treatment process
  • Triple conductor polishing process
  • 11m2 cross section for line and neutral
  • Machined separator spacers for vibration control and consistent geometry
  • Pressure-fit connections throughout—no solder in signal path
  • Enhanced anti-vibration architecture with exterior disturbance isolation

Materials

  • Three times the conductor strands compared to standard Flow cables
  • 6N purity copper conductors with long crystal structure
  • VDM (Vibration Damping Material) injection throughout
  • Custom-designed CNC machined connector components
Read more about VDM

Have questions about the Flow Master Reference Power Cord?

Contact Us

Experience the Flow Master Reference Power Cord and other Argento products in person.

Find a Dealer
Argento’s conductors are made from 99.9999% (“six-nines”) pure silver, which contains no more than about one part per million of other elements. Silver has the highest electrical conductivity of any metal, about 5–7% higher than copper. At the microscopic level, drawn metal is made of many small crystals, or grains, and impurities and oxides tend to gather at the boundaries between them. Argento uses a slow, controlled casting process, similar to Ohno Continuous Casting (OCC), to make silver with greatly elongated grains. A signal therefore crosses far fewer grain boundaries over the length of the cable. Combining high purity with this extended crystal structure is meant to keep the conductor as uniform as possible, so the cable passes the audio signal with as little change as possible.
A speaker cable carrying a signal is subject to mechanical vibration. Some comes from the magnetic forces between conductors carrying current, and some comes from the speakers, floor and room. Conventional cables surround their conductors with solid polymer insulation such as PVC, polyethylene or PTFE. Air-dielectric designs instead hold the conductors loosely in tubes or spacers. Both approaches can let the conductors and insulation resonate at their natural frequencies. Argento’s VDM is a proprietary damping compound applied around the conductors to absorb this energy and dissipate it as heat. The goal is to reduce microphonic effects, where physical vibration turns into small amounts of electrical noise, which Argento associates with coloration and harshness in the high frequencies.