Opens in a new tab

Extreme Edition Speaker Cable

Massive silver conductor arrays for uncompromised speaker connection

Each EE speaker cable deploys 960 individually insulated 6N silver conductors across four separate runs, with a 2.5m pair containing nearly 3 kilometers of silver weighing over 1.6kg.

Available connectors:
Spade
Available colors:
Black, White
Available lengths:
Custom lengths available in +.5m increments
Available colors:
Spade
Available connectors:
Black, White
Available lengths:
Custom lengths available in +.5m increments

Construction

  • Quad-cable architecture—two separate cables per channel
  • 240 individually insulated conductors per polarity
  • Pressure-fit connections throughout—no solder in signal path
  • Spade termination only (cable mass precludes banana connectors)
  • Nearly 3 kilometers of total conductor length in 2.5m pair

Materials

  • 960 total 6N purity silver conductors per stereo pair
  • VDM (Vibration Damping Material) insulation on each conductor
  • Custom spade connectors with 6N silver contacts
  • Carbon-polymer composite connector housings for noise absorption
  • Over 1.6kg of ultra-high purity silver in a 2.5m set
Read more about VDM

Have questions about the Extreme Edition Speaker Cable?

Contact Us

Experience the Extreme Edition Speaker Cable and other Argento products in person.

Find a Dealer
Argento’s conductors are made from 99.9999% (“six-nines”) pure silver, which contains no more than about one part per million of other elements. Silver has the highest electrical conductivity of any metal, about 5–7% higher than copper. At the microscopic level, drawn metal is made of many small crystals, or grains, and impurities and oxides tend to gather at the boundaries between them. Argento uses a slow, controlled casting process, similar to Ohno Continuous Casting (OCC), to make silver with greatly elongated grains. A signal therefore crosses far fewer grain boundaries over the length of the cable. Combining high purity with this extended crystal structure is meant to keep the conductor as uniform as possible, so the cable passes the audio signal with as little change as possible.
A speaker cable carrying a signal is subject to mechanical vibration. Some comes from the magnetic forces between conductors carrying current, and some comes from the speakers, floor and room. Conventional cables surround their conductors with solid polymer insulation such as PVC, polyethylene or PTFE. Air-dielectric designs instead hold the conductors loosely in tubes or spacers. Both approaches can let the conductors and insulation resonate at their natural frequencies. Argento’s VDM is a proprietary damping compound applied around the conductors to absorb this energy and dissipate it as heat. The goal is to reduce microphonic effects, where physical vibration turns into small amounts of electrical noise, which Argento associates with coloration and harshness in the high frequencies.