Opens in a new tab

Flow Ultima Interconnect Cable

2026 Absolute Sound awards: Editor's Choice and Product of the Year

Direct signal path through continuous silver conductors

The Flow Ultima interconnect employs patented technology where the 6N silver conductor itself becomes the contact, eliminating traditional connector interfaces while carbon fiber shielding and VDM injection control resonance and noise.

Available connectors:
RCA, XLR
Available colors:
Black, White
Available lengths:
1.0m, 1.5m, 2.0m, 2.5m, 3.0m, +.5m custom cable increments
Available colors:
RCA, XLR
Available connectors:
Black, White
Available lengths:
1.0m, 1.5m, 2.0m, 2.5m, 3.0m, +.5m custom cable increments

Construction

  • Revolutionary patented connector technology where conductor becomes the contact (XLR and banana)
  • Dual-cycle cryogenic treatment on all components
  • Pressure-fit assembly throughout—no solder in signal path
  • Thin contact geometry to minimize skin effect
  • Built-in vibration damping—no external cable elevators needed

Materials

  • RCA contacts are fully annealed, ultra long crystal, 6N high purity silver
  • PEEK polymer dielectric for all connectors—superior mechanical and electrical properties
  • Zirconia ceramic external connector housings
  • Carbon fiber absorptive shielding on all interconnects
  • VDM (Vibration Damping Material) injected throughout cable structure
  • Zero ferrous content—all screws are zirconia ceramic, high-strength polymer, or titanium
Read more about VDM

Have questions about the Flow Ultima Interconnect Cable?

Contact Us

Experience the Flow Ultima Interconnect Cable and other Argento products in person.

Find a Dealer
Argento’s conductors are made from 99.9999% (“six-nines”) pure silver, which contains no more than about one part per million of other elements. Silver has the highest electrical conductivity of any metal, about 5–7% higher than copper. At the microscopic level, drawn metal is made of many small crystals, or grains, and impurities and oxides tend to gather at the boundaries between them. Argento uses a slow, controlled casting process, similar to Ohno Continuous Casting (OCC), to make silver with greatly elongated grains. A signal therefore crosses far fewer grain boundaries over the length of the cable. Combining high purity with this extended crystal structure is meant to keep the conductor as uniform as possible, so the cable passes the audio signal with as little change as possible.
A speaker cable carrying a signal is subject to mechanical vibration. Some comes from the magnetic forces between conductors carrying current, and some comes from the speakers, floor and room. Conventional cables surround their conductors with solid polymer insulation such as PVC, polyethylene or PTFE. Air-dielectric designs instead hold the conductors loosely in tubes or spacers. Both approaches can let the conductors and insulation resonate at their natural frequencies. Argento’s VDM is a proprietary damping compound applied around the conductors to absorb this energy and dissipate it as heat. The goal is to reduce microphonic effects, where physical vibration turns into small amounts of electrical noise, which Argento associates with coloration and harshness in the high frequencies.